Item Code: DH250D-FS-N42
This part was previously named DH250D-FT-NI.
The tapered hole feature is located on the South pole of this magnet. If your application requires two magnets attaching together, please also see part DH250D-FN-N42 where the North pole of the magnet contains the taper.
Dimensions & Specs
Diameter:
0.5''(1/2'')
Thickness:
0.25''(1/4'')
Hole Diameter:
0.135''
Minor Diameter:
0.26''(13/50'')
Taper Angle:
82°
Recess on:
South
Mount With:
#4 Screw
14.25 lbs
3618
Material:
Licensed NdFeB
Grade:
N42
Plating:
Ni-Cu-Ni
Magnet Weight:
5.36 g
Item Code: DH250D-FS-N42
This part was previously named DH250D-FT-NI.
The tapered hole feature is located on the South pole of this magnet. If your application requires two magnets attaching together, please also see part DH250D-FN-N42 where the North pole of the magnet contains the taper.
